Продається подвійний турбо-кіт на 680 сил та 700Нм моменту для Chevrolet Corvette C7.
Новий повний комплект.

Опис продукту в оригіналі від виробника:
UPP C7 Corvette Twin Turbo Kit
This system features a 304 stainless steel Sch 10 tubular manifolds. On a stock C7 (A8) this system made 609whp on pump gas with only 6psi and a fully stock exhaust. Upgrading the exhaust allowed for the full 7psi of boost and a staggering 678whp and 696ft/tq! All of this with full boost achieved by 2800 RPM; far sooner than on a centrifugal supercharger system. In fact you can see in the dyno graph that the power separation between the stock run and turbo runs is instant and noticeable even at 2000 RPM with over 100whp gains! This results in a better power curve, more torque, and more power delivered to the wheels. This turbo system was designed to have an aggressive appearance while maintaining all factory options including AC and power steering. Our 5871 turbos will cover you up to 1100WHP and if that isn’t enough our 6182R stage 2 ball bearing turbo upgrade will cover you all the way up to 1400WHP. We offer an industry first 2 YEAR WARRANTY on our turbos and a LIFETIME WARRANTY on both our hot and cold side plumbing.

Комплектація:
This system includes:
-2x Stainless Steel Tubular Manifolds
-2x UPP-5871 Turbos
-2x Down-pipes
-2x K&N Filters
-2x 7PSI TurboSmart 40mm Wastegates
-TurboSmart Race Port BOV
-Front Mount Air-to-Air Intercooler
-Intercooler Piping
-3-Ply Silicone Couplers
-Stainless Steel T-Bolt Clamps
-Stainless Steel Oil Feed/Return Lines W/AN Fittings
-Spark Plug Wires
-Valve Vanity Covers
-Radiator Vanity Cover
-Brake Fluid Reservoir Heat Shield
-Aluminum Coolant Overflow Tank
-All Necessary Hardware and Fittings
-Ceramic Coating Standard

Style
The UPP twin turbo system is designed with style and performance in mind. With a top mount “in your face” design, it’s sure to draw a crowd when you pop your hood.

Tuning
This systems is fully customizable and tunable to whatever your application needs are. As with most of our systems we don’t include a base “cookie cutter” tune with this system. We believe each and every system should be individually tuned based off what your needs are. You have the ability to make the system as mild/wild as you desire!

Ceramic Coating
Ceramic coating is standard on our C7 kits. Our ceramic coating is a two part process featuring a flow coating on the interior of all pre-turbo piping; 15mil thick coating causing a 60% drop in thermal transfer through the piping. Then all of the exhaust components are ceramic coated externally for an additional layer of protection along with a smooth matte black finish.