Продам акустику центральний канал Klipsch Reference RC10 в ідеальному стані. S P E C I F I C A T I O N S
BANDWIDTH 88Hz-20kHz ± 3dB
SENSITIVITY 95dB 2.83 volts/1 meter
NOMINAL IMPEDANCE 8 ohms compatible
CROSSOVER FREQUENCY 2550Hz
POWER HANDLING 75 watts (300 watts peak)
ENCLOSURE TYPE Bass reflex via dual front-firing ports
DRIVE COMPONENTS Tapered Array system using one 1''
(2.5cm) magnetically shielded, titanium
dome compression driver with an integral 4''
(10.2cm) square 90˚x 60˚ Tractrix H orn a n d
two 4'' (10.2cm) magnetically shielded,
Cerametallic cone woofers
Part of the new Reference 10 family, the RC-
10 center channel adds a new value point to
Klipsch’s best-selling Reference Series line by
offering the same advanced technology and
world-class materials as the Reference III
center channels but from a smaller enclosure
and at a lower price point.
The RC-10 employs dual 4-inch woofers and a
1-inch titanium-dome compression driver
loaded with a 4-inch square T r a c t r i x® Horn for
maximum clarity and efficiency.
This center channel also utilizes Klipsch’s
Ta p e r e d -Array™ T e c h n o l o g y, a 2.5-way design
that minimizes the acoustical interference
between drivers that plagues most horizontal
c e n t e r-channel speakers. This technology
allows both woofers to create intense bass,
while only one works with the tweeter to
produce the midrange. The result is a smooth,
clear sound not just directly in front of the
s p e a k e r, but off to the sides as well, where
conventional center speakers often exaggerate
or mask sounds.
The woofers on the RC-10 still feature
Klipsch’s distinctive, copper- c o l o r e d
Cerametallic™ material. Made with an
anodized aluminum, these cones are strong
with low mass. The anodizing process
converts their inner and outer surfaces to
ceramic. The outcome is a rigid cone with
superb damping characteristics that will not
flex or resonate at frequencies within the
w o o f e r’s operating range.
*All dimensions include grille and binding posts
As in all Reference Series speakers, the RC-
10 crossover network is constructed using
extremely high-quality components including
t o p -of-the-line internal wiring, polyester film-
type capacitors and an air-core inductor to
ensure signal purity and proper driver
i n t e g r a t i o n .
Available in a black ash vinyl finish, the RC- 1 0
features a low-diffraction sculpted baffle and a
magnetically attached grille for an elegant fit
and finish.
WEIGHT 13 lbs. (5.9kg)
HEIGHT 5.4" (13.7cm)
WIDTH 16" (40.6cm)
DEPTH 9.1" (23.1cm)
FINISH Black Ash woodgrain vinyl