Model Number: CAB-SS-X21MT
Description: Cisco Smart Serial to X.21 DB15 DTE Male 10ft Cable 72-1440-01
Original Cisco Part #: 72-1440-01
Connector 1: Smart Serial 26-PIN Male
Connector 2: X.21 DB15 DTE Male
Length: 10 feet
Cable Type: 28 AWG Copper

Cisco X.21 Cable DTE Male 3m networking cable 3.048 m
телефон дам при потребі

NOTE: The information below is provided for your convenience only and we cannot guarantee its accuracy. If necessary, please verify with us before purchasing.
Cisco X.21 Cable DTE Male 3m networking cable 3.048 m GreyCAB-X21MT 3m STP Router Cable

The CAB-X21MT serial cable is used in the Cisco 7000 family, Cisco 4000 series, Cisco 3600 series, Cisco 2500 series, Cisco 1600 series, Cisco access servers, and AccessPro PC cards. This cable has a male DB-60 connector on the Cisco end and a male DB-15 connector on the network end.

Part Number

Description

Remarks

04043593

Single Cable, X.21 Serial Port Cable, 3m, D15M, CC(5P+8C)0.32P296U(S), D28M, DTE

Optional

Connection
An X.21 DTE cable is connected as follows:

The X1 connector (DB28) is connected to the SA interface card of a router.
Connection of the X2 connector (DB15) depends on the type of the WAN link:
If the WAN link is a digital data network (DDN) line, connect the X2 connector to an interface of a channel service unit (CSU) or data service unit (DSU).
If the WAN link is a dial-up line, connect the X2 connector to the serial interface on a modem.
Ordering Information
Table 8-49 provides the X.21 DTE cable ordering information.
відправлю олх доставкою, фото зроблені з товару, всі питання в повідомлення